Seekins Precision Rings
Most Seekins Rings In stock, Ready to Ship today!
Please Note:
34 mm Rings & 30 mm MED Rings out of stock, email for ETA
35mm Highs are no longer available through Seekins. Seekins Precision rings are built to withstand the demands of serious shooters without the extra weight of steel. The popular Slimline clamping system uses two of the same grade 8 Torx™ screws to tighten the side clamp onto the picatinny rail. The slimline clamping system gives the shooter a slim, snag free setup that easily slips in or out of a scabbard, drag bag, or Eberlestock pack system. Guaranteed for life!
!
Ring specs
Material: Billet 7075-T6 Aluminum alloy
Screws: Grade 8 T-25 Torx™ 8-32x1/2
Coating: Milstd Type III Black hard anodize Width:
.65” wide - 1”scope tube rings only
.8” wide- 4 cap screws
Torque spec
Cap screws 15-25 INCH lbs.
Clamp screws 55 INCH lbs.
Ring height is measured from the top of the rail to centerline of scope tube
|
Tube Diameter |
Low |
Medium |
Med high |
High |
|
*1 inch |
0.75" |
n/a |
n/a |
n/a |
|
30mm |
0.82" |
0.87" |
0.92" |
0.97" |
|
34mm |
0.92" |
n/a |
n/a |
0.97" |
|
35mm |
0.95" |
n/a |
n/a |
1.00" |
!
<<
|